Western Digital's Raptors in RAID-0: Are two drives better than one?
by Anand Lal Shimpi on July 1, 2004 12:00 PM EST- Posted in
- Storage
Game Loading Performance
For our game loading tests, we used two games: Far Cry and Unreal Tournament 2004. Both games were installed, in full, to the hard drive. We then used no-CD patches to prevent any accessing of the CD/DVD drive to skew the loading process. Both games were installed to a clean drive without anything else present on the drive (the OS is located on a separate drive).Our Far Cry test consists of starting a campaign with the default difficulty level, hitting escape to skip the introductory movie and beginning the stop watch timer at first sight of the loading screen. The stop watch timer is stopped as soon as the loading screen disappears. The test is repeated three times with the final score reported being an average of the three. In order to avoid the effects of caching, we reboot between runs. All times are reported in seconds; lower scores, obviously, being better.
We were hoping to see some sort of performance increase in the game loading tests, but the RAID array didn't give us that. While the scores put the RAID-0 array slightly slower than the single drive Raptor II, you should also remember that these scores are timed by hand and thus, we're dealing within normal variations in the "benchmark".
Our Unreal Tournament 2004 test uses the full version of the game and leaves all settings on defaults. After launching the game, we select Instant Action from the menu, choose Assault mode and select the Robot Factory level. The stop watch timer is started right after the Play button is clicked, and stopped when the loading screen disappears. The test is repeated three times with the final score reported being an average of the three. In order to avoid the effects of caching, we reboot between runs. All times are reported in seconds; lower scores, obviously, being better.
In Unreal Tournament, we're left with exactly no performance improvement, thanks to RAID-0.
Facebook
Twitter
RSS
127 Comments
View All Comments
bhvm - Tuesday, June 22, 2010 - link
t1n0m3n,Agreed cent percent.
Whereas our processors are zooming in Ghz and Rams in GBs... Our old humble HDDs are still around 60MB/.s
A properly setup RAID (with dedicated controller) will give close to 90% performance boost. I run Software RAID 0 on my laptop (its a monster laptop with 2 x 7200 RPM seagate momentus) for My database... Its just not about the Raw speed and numbers... the machine 'feels' damm so fast. Also, despite being software RAID, Single drive gives 45MB/s.... Whereas RAID 0 partition gives easily 85 MB/s/.
Long live the RAID!
Ambress - Wednesday, November 10, 2004 - link
While this article on RAID was quite informative, I would be very interested in seeing what the measured peformance differences are for an application such as Photoshop, where a secondary hard drive assigned as a scratch disk is recommened for optimum performance. Perhaps one problem here is finding some reliable Photoshop benchmarking tool, but surely one exists. Even without that, just performing a repeatable action that exercises a series of steps that are certain to force scratch disk usage could demonstrate what RAID 0 advantages exist, when used as the scratch disk. Such a test would likely require the manipulation also of a rather large image file...perhaps 100MB or more. I suspect other applications that work with large data files, such as video editing applications, would also benefit noticeably from a RAID 0 array. If this doesn't prove to be the case, then my plans for my next PC could be simplified and costs reduced. I've anticipated building a system with a RAID 0 system drive and a RAID 0 data drive, although I'm now thinking that RAID 0 for a system drive may be overkill.DatabaseMX - Tuesday, October 19, 2004 - link
At the beginning of the article:"Unfortunately, if you lose any one of the drives in the array, all of your data is lost and isn't recoverable."
If you lose your drive in a single drive system, all of your data is lost and isn't recoverable, thus, the above statement has no special meaning. However, in both cases, if you have backed up your drives, then you can recover. Also, I fail to see how two drives in a RAID 0 will halve the MTBF.
This review is hardly based on any scientific approach - one controller / motherboard combination and one brand of hard drive. Get real. And to not delve into WHY there was only minimal performance increase further dilutes the results of this review/test.
#64 pretty much spells it all out - nice job.
#87 (et.al) ... It doesn't matter if it doubles, triples or 1000 times it ... just like with ONE drive ... you are hosed if you don't have a full system backup! The primary concept of RAID 0 is to get more performance, not to worry about drive failure. If you are worried about drive failure, then use RAID 1 or some other RAID level which deals with redundancy.
Backup is the key here. And I can attest that Acronis True Image (www.acronis.com) is one brilliant piece of backup software. I have used it in multiple scenarios, including restoring an image file on to a brand new, un-partitioned, un-formatted hard drive (both IDE and SCSI), then booting up with the new drive - restored 100 %. And the good news .... it supports (some) SATA RAID configurations - and the new Promise FastTrak TX2200 controller (according to Acronis tech support).
So, the issue is NOT about the so-called dangers of a RAID 0 array and drive failure and statistics and probability, but instead >> performance. It's time to create some new benchmarks that focus specifically on testing RAID configurations, ie back to the future, instead of all the sorry old benchmarks mentioned above.
I will be interesting to see how new Promise FastTrak TX2200 SATAII controller connected to a pair of the new Maxtor SATA DiamondMax 10 300GB, 16MB in a RAID 0 configuration fairs out in tests. In fact, it would be interesting to see how the Promise FastTrak TX4200 with 4 Maxtor drives in a RAID 10 configuration works out. Best if both worlds - performance and redundancy? Since both the new Promise controller and Maxtor drives support NCQ and SATA TCQ ... one would think this should make a dent in RAID 0 (and RAID 10, etc) performance. I'm about to find out ... as soon as the TX4200 arrives at my door step.
><><><>
MplsBob - Wednesday, October 13, 2004 - link
I surely do wish that this testing of RAID 0 had included the unique cards from Netcell. Their SyncRaid line looks as though it might be promising, but in the end are their results in "real world" testing sufficently good to make it worthwhile.How about it AnandTech, could you expose one of these SyncRaid cards to the same testing you had in this article?
kmmatney - Monday, September 13, 2004 - link
I would haveliked to see the differences using RAID with slower hard drives. Not everybody has a Raptor. Does RAID have a greater impact if the hard drives are slower to begin with?mbor - Tuesday, August 24, 2004 - link
btw, a striping array of 2 raptors shouldn't be called RAID, but NAED:Non-redundant Array of Expensive Disks ;)
mbor - Monday, August 23, 2004 - link
I find the conclusions in the article surprising. When I have bought a second drive and configured it in a RAID 0 array, the performance increase could be clearly seen. I was so impressed that the first thing I'm looking for in the next mobo I plan to buy is a good RAID controller with 4 drive RAID 0 capability.Perhaps the tests simply don't show it, but in reality, at least in my case, the performance did increase noticeably.
You can even see it in Windows Explorer. Opening a directory with a couple hundred files inside is faster than with a single drive. The same applies to other apps that work on large ammounts of data.
Pumpkinierre - Friday, July 9, 2004 - link
Nicely put mdrohn, I still dont regard backup as superfluous. Its really terms like: extra redundancy or built-in redundancy etc. that grate with me. The term seems to be used for things that mean error protection or failure proofing. In Raid1 the second disc is superfluous as far as extra storage goes, but it can be used for simultaneous reads or even striped reads which improve speed as well as backup - hardly supefluous. My usage of the word has been as 'not needed' more akin to obsolescence than anything else. But apparently the term is widely used in the electronics industry. So perhaps another example of English being subroutined (or bastardised).At least we made it to 3figures in the posts and page 6.
mdrohn - Friday, July 9, 2004 - link
Well, my Aussie friend, since we're splitting linguistic hairs, I maintain that the primary meaning of 'redundancy' (from the latin 'redundare' meaning 'to overflow'), both linguistically and electronically, is in its sense of 'superfluity or excess'. The sense of 'uselessness' is a secondary meaning which has evolved from that primary one. Every dictionary I have checked lists the superfluous sense above the useless one, which is an indicator of semantic primacy.But I suspect that this discussion has become somewhat redundant, since we both seem to be making the same points over and over again ;)
masher - Friday, July 9, 2004 - link
Interesting read on storagereview, Timw. It proves what I suspected-- that beyond 3 disks, performance for large Raid 0 arrays actually declines. It also demonstrates that Raid 0 using slower disks isn't appreciably better than with pricey Raptors.Also interesting...for single-user operation, command tagging and queuing tends to decrease performance.
The past postings to this thread demonstrate why some people believed in a flat earth up to the 19th century, and some today think the Apollo moonlanding was staged by Hollywood. People cling to illusions, despite reality.
To use technical terms, Desktop Raid-0 sucks. Get over it.