Price-Point Comparing Three-Way Case Shootout
by Joshua Buss on January 13, 2006 12:05 AM EST- Posted in
- Cases/Cooling/PSUs
Final Words
This was a bit of a deviance from our normal article structure here at AnandTech, but we really do feel that it illustrates things in the case realm in a rather enlightening way. Typically, the P150 is available right around the $150 price point, with sales bringing it down to $115. With this premium comes an incredibly stylish, quiet, excellent-performing, easy to use, sturdy, and above all a practical product, including even one of Antec's nicest power supplies. The P150 is a delight to work in, and the rail system makes everything snug and simple.
However, available for as little as $50, or $70 with a 450 watt power supply, one can receive a case which, in our opinion, is so close in performance to the P150 that the choice for anyone who likes the styling of both units is simply a no-brainer. The X1 does have a bit more of a "gamer's" look to it, but at least it's not nearly as distasteful as so many gaming themed units.
Finally, at the lowest price point, the E68 actually fared quite well compared to these competing products. For a mere $30, one can have a solidly performing, simple-enough, and still rather tasteful case that, at least from the front, looks like it's worth a lot more than what you're really paying for it, in our opinion.
While the P150's look will definitely grab some people's attention enough to warrant them getting that case, we really find the price a little steep, considering the lack of a door, screen, window, or anything else that would truly add that much to the cost of the product. If a user really cares about simple, elegant aesthetics, then perhaps they'll feel otherwise though. And, with the additional goodies of the X1 - namely the window and sharp LCD display on the front - available for only $20 more than the E68, the X1 gets our nod as the recommended case in this little roundup, and in fact, delivers so much bang for the buck in our opinion that it is deserving of our silver editor's choice award. Simply put, it's been a long time since we've seen such a nice case available for so little dough. Congratulations deserve to be sent out to all three manufacturers, though, for all of these units are above-average performers and come highly recommended from AnandTech.
UPDATE: The problem not previously mentioned of not being able to access the X1's ports after the door was closed is severe enough to degrade our judgement of the X1 from Gold to Silver.
This was a bit of a deviance from our normal article structure here at AnandTech, but we really do feel that it illustrates things in the case realm in a rather enlightening way. Typically, the P150 is available right around the $150 price point, with sales bringing it down to $115. With this premium comes an incredibly stylish, quiet, excellent-performing, easy to use, sturdy, and above all a practical product, including even one of Antec's nicest power supplies. The P150 is a delight to work in, and the rail system makes everything snug and simple.
However, available for as little as $50, or $70 with a 450 watt power supply, one can receive a case which, in our opinion, is so close in performance to the P150 that the choice for anyone who likes the styling of both units is simply a no-brainer. The X1 does have a bit more of a "gamer's" look to it, but at least it's not nearly as distasteful as so many gaming themed units.
Finally, at the lowest price point, the E68 actually fared quite well compared to these competing products. For a mere $30, one can have a solidly performing, simple-enough, and still rather tasteful case that, at least from the front, looks like it's worth a lot more than what you're really paying for it, in our opinion.
While the P150's look will definitely grab some people's attention enough to warrant them getting that case, we really find the price a little steep, considering the lack of a door, screen, window, or anything else that would truly add that much to the cost of the product. If a user really cares about simple, elegant aesthetics, then perhaps they'll feel otherwise though. And, with the additional goodies of the X1 - namely the window and sharp LCD display on the front - available for only $20 more than the E68, the X1 gets our nod as the recommended case in this little roundup, and in fact, delivers so much bang for the buck in our opinion that it is deserving of our silver editor's choice award. Simply put, it's been a long time since we've seen such a nice case available for so little dough. Congratulations deserve to be sent out to all three manufacturers, though, for all of these units are above-average performers and come highly recommended from AnandTech.
| Raidmax X1 |
 |
UPDATE: The problem not previously mentioned of not being able to access the X1's ports after the door was closed is severe enough to degrade our judgement of the X1 from Gold to Silver.
Facebook
Twitter
RSS
69 Comments
View All Comments
Tamale - Friday, January 13, 2006 - link
You know, several of those descriptions never did sit well with me.. and perhaps I am a little too biased towards the geekier look... I'll try to tone down my enthusiasm for the X1 a bit.As for the hard mounting vs. soft mounting, our maxtor IDE drive is very very quiet, and seeking noises couldn't be heard in the P150 at all even using the "hard" (silicone grommets) mount.
Seeking sounds were only barely audible in the E68 and X1.
strikermlc - Friday, January 13, 2006 - link
I'm sorry, but the statement about the p150 falling short because it doesn't even have a "classy window" on the side is incredibly funny to me. Personally the p150 is the only one out of the three cases that would aesthetically have a chance of making it into an open living space in my home. I'm just as big of a gamer and hardware geek as anyone and I've been a daily reader of anandtech for years - but that comment in my opinion clearly reinforces that while anandtech should be held in very high regard for their knowledge of hardware - their aesthetic evaluations are clearly lacking.While the front of the raidmax case is not unforgivable - the side panel is. The window is downright tacky and the decorative arrows around the window are laughable - as if the window that will soon be displaying countless oversized glowing fans and other lights is incapable of attracting enough attention on it's own?
I realize everyone is entitled to their own opinion. And while I'm sure there are plenty of twelve year old anandtech readers drooling over this case, the window on this case is in no means and under no circumstances "classy" and it never will be. There have got to be plenty of adult readers at anandtech that will agree with me on this point.
True class is understated - and that's what I want my case to exhibit. Well designed functionality, quiet, crisp clean lines and quality materials - brushed metal and glossy paint are certainly fine, it doesn't have to be boring by any means. It just shouldn't fill the room with a whirling, glowing, fire-eating circus show.
Ah well, I've made my point. $0.02 from a graphic designer that loves his pc's and computer hardware just as much as the next anandtech reader, and unlike most graphic designers, regard's mac's as simply an overpriced novelty item.
Thanks and good night.
aaron
yacoub - Friday, January 13, 2006 - link
Well stated, aaron. The P150 is the most mature looking of the three cases - the most gimmick-free. Everything about it is functional and meant to meet its design goals of the best quiet-computing mid-tower on the market. It succeeds.Erssa - Friday, January 13, 2006 - link
I cannot believe that the amateur reviewer hardmounted the HDD instead of using the soft mount method, that would have subjectively really made a difference in sound levels.Very superficial review overall. I wonder what the reviewer would have said about the cases had he used a silent cpu cooler (even zalman 7700cu fan mated would have been good) and passive GPU. I believe it would have really turned out the table for antecs advantage. Sound measurements from the sides would have been a nice addition aswell. Since antec was the only case that had no ways for sound to escape from the side. Measuring noise from 6" doens't make too much sense either since nobody has his head 6" from the front of his computer. Something like 1m would have been nice, but that would have probably ment that combined with more silent combonents the sound measuring device would have proved itself inadequate.
Xenoterranos - Friday, January 13, 2006 - link
That wouldn't have really been a case test then would it? It would have been a silent-cpu-cooler-and-passive-gpu-cooler-in-cases-x-y-and-z test.While I can't disagree on the technical merrits of the Raidmax case, those little blue triangles really turn me off. Maybe I'm just not aesthetically inclined.
Trippytiger - Friday, January 13, 2006 - link
The Antec may be the most expensive of the group, but it seems to me that it also comes with the most trustworthy power supply of the three as well. I know I'd want to replace the power supply in that Raidmax case if I were going to use it.Tamale - Friday, January 13, 2006 - link
You can get it without one entirely if you want for only $50. Also, heed my note about the Raidmax supply - it's been running strong (and still is by the way) in another decently-equipped PC here in my lab.mindless1 - Friday, January 13, 2006 - link
It's been running, but what is "strong"? That it runs? The question with such PSU is not does it run but how long it does and what happens when it begins failing. If it does not last the life of the system, another PSU must be bought and all savings are negated.Tamale - Saturday, January 14, 2006 - link
By strong I simply mean steady voltages, even under load. And of course, length of life is an issue, but I've only had the power supplies for a few weeks, so I comment on that much, other than the fact that both Antec supplies I received have problems with the 3.3v rail.leofischer - Friday, January 13, 2006 - link
I doubt the drives were suspended, because he says'Also note the rubber bands stretched across the sides of this cavity. While we're not 100% sure, we are fairly certain that this is an effort to help minimize vibrations from the hard drives that may cause additional noise within the case.'
duh..
Doesn't seem like he realised what the bands were for. I assume there is some kind of explanation accompanying the case or mention of the suspension method in literature, but I wouldn't know.